ＥＰＯＳＩＤＥ ０１ 最终稿 １００％

Shirley

Dialogue: Marked=0,0:01:30.32,0:01:32.75,Default,,0000,0000,0000,,{\fad(300,050)}时间 公元 2015 年

Dialogue: Marked=0,0:01:55.10,0:02:27.20,BGS,,0000,0000,0000,Banner;11;0;100,{\fad(100,8000)}{\fs22}今日 12 点 30 分，对以东海地域为中心的关东、中部全部地区，宣布进入特殊紧急状态，各位居民请立刻到指定的避难所避难                               再重复一次，今日 12 点 30 分，对以东海地域为中心的关东、中部全部地区，宣布进入特殊紧急状态，各位居民请立刻到指定的避难所避难

Dialogue: Marked=0,0:02:20.86,0:02:23.92,Default,,0000,0000,0000,,{\fad(050,050)}怎么偏偏在这时候找不到人
Dialogue: Marked=0,0:02:24.36,0:02:25.70,Default,,0000,0000,0000,,{\fad(050,050)}真伤脑筋
Dialogue: 0,0:02:26.11,0:02:28.69,special,,0000,0000,0000,,{\b2}{\pos(225,483)}{\frz-6}碇   真嗣
Dialogue: Marked=0,0:02:27.20,0:02:29.82,BGS,,0000,0000,0000,,{\fad(100,100)}由于宣布进入特殊紧急状态
Dialogue: Marked=0,0:02:29.85,0:02:33.32,BGS,,0000,0000,0000,,{\fad(100,100)}现在所有的普通线路均无法通话
Dialogue: Marked=0,0:02:34.57,0:02:35.20,Default,,0000,0000,0000,,{\fad(050,050)}不行吗
Dialogue: Marked=0,0:02:36.82,0:02:38.59,Default,,0000,0000,0000,,{\fad(030,050)}果然不应该来的

Dialogue: Marked=0,0:02:42.83,0:02:45.21,special,,0000,0000,0000,,{\pos(220,250)}{\fad(100,100)}{\frz10}看这里!!
Dialogue: Marked=0,0:02:42.83,0:02:45.21,special,,0000,0000,0000,,{\pos(215,165)}{\fad(100,100)}{\frz9}给真嗣♡
Dialogue: Marked=0,0:02:42.83,0:02:45.21,special,,0000,0000,0000,,{\pos(650,050)}{\fad(100,100)}{\frz9}我会去接你
Dialogue: Marked=0,0:02:42.83,0:02:45.21,special,,0000,0000,0000,,{\pos(720,180)}{\fad(100,100)}{\frz9}稍等一下哟

Dialogue: Marked=0,0:02:43.28,0:02:44.80,Default,,0000,0000,0000,,{\fad(050,050)}看来是碰不上她了
Dialogue: Marked=0,0:02:46.73,0:02:47.60,Default,,0000,0000,0000,,{\fad(050,050)}没办法…
Dialogue: Marked=0,0:02:47.83,0:02:48.75,Default,,0000,0000,0000,,{\fad(030,050)}先去避难所吧
Dialogue: Marked=0,0:03:14.90,0:03:18.54,Default,,0000,0000,0000,,{\fad(050,050)}不明移动物体正朝基地方向前进
Dialogue: Marked=0,0:03:19.25,0:03:20.62,Default,,0000,0000,0000,,{\fad(050,050)}确认目标影像
Dialogue: Marked=0,0:03:21.05,0:03:22.30,Default,,0000,0000,0000,,{\fad(050,050)}现在切换到主屏幕上


Dialogue: Marked=0,0:03:23.00,0:03:26.30,BGS,,0000,0000,0000,,{\fad(150,150)}目标周围侦测到磁场异常，请直接开始作精密测定
Dialogue: Marked=0,0:03:26.30,0:03:28.90,BGS,,0000,0000,0000,,{\fad(150,150)}根据光学观测的结果，将验证作业设为最优先


Dialogue: Marked=0,0:03:24.28,0:03:25.65,Default,,0000,0000,0000,,{\fad(050,050)}事隔 15 年了吧
Dialogue: Marked=0,0:03:26.00,0:03:27.74,Default,,0000,0000,0000,,{\fad(050,050)}嗯，错不了
Dialogue: Marked=0,0:03:29.00,0:03:30.10,Default,,0000,0000,0000,,{\fad(050,050)}是使徒
Dialogue: Marked=0,0:03:42.45,0:03:43.80,Default,,0000,0000,0000,,{\fad(050,100)}导弹全部命中目标
Dialogue: Marked=0,0:04:03.42,0:04:05.00,Default,,0000,0000,0000,,{\fad(050,100)}抱歉，让你久等了
Dialogue: Marked=0,0:04:22.05,0:04:26.40,Default,,0000,0000,0000,,{\fad(050,050)}目标物依然存在，目前继续向第三新东京市前进
Dialogue: Marked=0,0:04:26.60,0:04:28.90,Default,,0000,0000,0000,,{\fad(050,050)}航空队没有办法阻止它
Dialogue: Marked=0,0:04:29.75,0:04:31.00,Default,,0000,0000,0000,,{\fad(000,050)}进行总攻

Dialogue: Marked=0,0:04:29.70,0:04:32.00,BGS,,0000,0000,0000,,{\fad(150,150)}横须贺第 {\fs20}{\fnBitsumishi}2{\fs22}{\fn方正综艺简体} 小队，正在向左翼展开
Dialogue: Marked=0,0:04:32.10,0:04:36.12,BGS,,0000,0000,0000,,{\fad(150,150)}陆上第 {\fs20}{\fnBitsumishi}1{\fs22}{\fn方正综艺简体} 中队与目标接触，目前交战中，损害不明

Dialogue: Marked=0,0:04:31.25,0:04:33.00,Default,,0000,0000,0000,,{\fad(020,100)}把厚木和入间所有的兵力都派出去
Dialogue: Marked=0,0:04:33.18,0:04:34.44,Default,,0000,0000,0000,,{\fad(020,100)}别在乎损失了
Dialogue: Marked=0,0:04:34.58,0:04:36.12,Default,,0000,0000,0000,,{\fad(000,100)}无论如何都要将目标击毁
Dialogue: Marked=0,0:04:49.90,0:04:52.00,Default,,0000,0000,0000,,{\fad(020,050)}为什么？ 应该是直接命中了啊


Dialogue: Marked=0,0:04:49.84,0:04:51.60,BGS,,0000,0000,0000,,{\fad(100,100)}对目标的损害无法确认
Dialogue: Marked=0,0:04:51.80,0:04:54.50,BGS,,0000,0000,0000,,{\fad(100,100)}第 {\fs20}{\fnBitsumishi}1{\fs22}{\fn方正综艺简体} 中队没有回答，看上去全被歼灭了
Dialogue: Marked=0,0:04:55.20,0:04:58.00,BGS,,0000,0000,0000,,{\fad(100,100)}无法确认航空第 {\fs20}{\fnBitsumishi}6{\fs22}{\fn方正综艺简体} 小队的踪迹
Dialogue: Marked=0,0:04:58.00,0:05:01.00,BGS,,0000,0000,0000,,{\fad(100,100)}第  {\fs20}{\fnBitsumishi}2{\fs22}{\fn方正综艺简体} 特科大队，开炮中，依然没有效果
Dialogue: Marked=0,0:05:01.00,0:05:05.40,BGS,,0000,0000,0000,,{\fad(100,100)}目标沿路线 {\fs20}{\fnBitsumishi}83{\fs22}{\fn方正综艺简体} 至 {\fs20}{\fnBitsumishi}88{\fs22}{\fn方正综艺简体} 前进中，速度没有变化
Dialogue: Marked=0,0:05:05.40,0:05:09.75,BGS,,0000,0000,0000,,{\fad(100,100)}第 {\fs20}{\fnBitsumishi}4{\fs22}{\fn方正综艺简体} 次航空支援部队现在到达，从小田原方面展开
Dialogue: Marked=0,0:05:09.75,0:05:12.95,BGS,,0000,0000,0000,,{\fad(100,100)}目标从塔泽地区侵入，突破第 {\fs20}{\fnBitsumishi}3{\fs22}{\fn方正综艺简体} 防御线


Dialogue: Marked=0,0:04:52.70,0:04:54.20,Default,,0000,0000,0000,,{\fad(020,100)}战车部队全被歼灭
Dialogue: Marked=0,0:04:55.00,0:04:57.65,Default,,0000,0000,0000,,{\fad(050,050)}制导武器和炮击都完全无效吗…
Dialogue: Marked=0,0:04:57.90,0:05:00.80,Default,,0000,0000,0000,,{\fad(020,050)}不行，这种程度的火力根本就不管用
Dialogue: Marked=0,0:05:01.50,0:05:03.15,Default,,0000,0000,0000,,{\fad(020,050)}果然还是 {\fs30}{\fnBitsumishi}A.T.Field{\fs35}{\fn方正粗宋简体} 吗
Dialogue: Marked=0,0:05:03.30,0:05:06.80,Default,,0000,0000,0000,,{\fad(050,050)}嗯，普通武器对付使徒是没用的
Dialogue: Marked=0,0:05:10.60,0:05:13.60,Default,,0000,0000,0000,,{\fad(050,050)}知道了，就照预定计划进行
Dialogue: Marked=0,0:05:18.70,0:05:19.70,Default,,0000,0000,0000,,{\fad(050,050)}等等，不会吧…
Dialogue: 1,0:05:20.20,0:05:21.73,Default,,0000,0000,0000,,{\fad(050,080)}他们打算用 {\fsp 13}{\fs31}{\fnBitsumishi}N{\fsp 0}{\fs35}{\fn方正粗宋简体} 地雷吗
Dialogue: 0,0:05:20.20,0:05:21.73,Default,,0000,0000,0000,,{\fad(050,080)}{\pos(405,490)}{\fs18}{\fnBitsumishi}2
Dialogue: Marked=0,0:05:22.60,0:05:23.10,Default,,0000,0000,0000,,{\fad(050,050)}趴下！

Dialogue: Marked=0,0:05:47.30,0:05:50.50,BGS,,0000,0000,0000,,{\fad(100,100)}电磁热线的 {\fs20}{\fnBitsumishi}99.8%{\fs22}{\fn方正综艺简体} 直接命中目标
Dialogue: Marked=0,0:05:50.50,0:05:54.00,BGS,,0000,0000,0000,,{\fad(100,100)}爆炸中心地区，测定温度为 {\fs20}{\fnBitsumishi}12000{\fs22}{\fn方正综艺简体} 度

Dialogue: Marked=0,0:05:46.49,0:05:47.20,Default,,0000,0000,0000,,{\fad(050,100)}成功了！
Dialogue: Marked=0,0:05:48.50,0:05:51.60,Default,,0000,0000,0000,,{\fad(050,050)}很可惜，好像轮不到你们出场了
Dialogue: Marked=0,0:05:52.25,0:05:53.80,Default,,0000,0000,0000,,{\fad(050,100)}冲击波抵达
Dialogue: Marked=0,0:05:55.15,0:05:56.22,Default,,0000,0000,0000,,{\fad(050,050)}没事吧？
Dialogue: Marked=0,0:05:56.60,0:05:60.00,Default,,0000,0000,0000,,{\fad(050,050)}嗯，不过嘴里好像全是沙子
Dialogue: Marked=0,0:06:00.05,0:06:01.18,Default,,0000,0000,0000,,{\fad(020,050)}那就没事
Dialogue: Marked=0,0:06:01.60,0:06:03.75,Default,,0000,0000,0000,,{\fad(050,050)}那么要开始了哦…
Dialogue: Marked=0,0:06:04.60,0:06:05.60,Default,,0000,0000,0000,,{\fad(050,050)}1 … 2
Dialogue: Marked=0,0:06:14.60,0:06:16.59,Default,,0000,0000,0000,,{\fad(050,050)}谢啦，帮大忙了
Dialogue: Marked=0,0:06:16.90,0:06:19.60,Default,,0000,0000,0000,,{\fad(050,050)}哪里，我才是呢，葛城小姐
Dialogue: Marked=0,0:06:20.00,0:06:21.62,Default,,0000,0000,0000,,{\fad(050,050)}叫“美里”就可以了
Dialogue: Marked=0,0:06:22.45,0:06:25.80,Default,,0000,0000,0000,,{\fad(050,050)}再次请你多多指教了，碇真嗣
Dialogue: Marked=0,0:06:26.35,0:06:26.80,Default,,0000,0000,0000,,{\fad(050,100)}是
Dialogue: Marked=0,0:06:27.45,0:06:28.78,Default,,0000,0000,0000,,{\fad(050,050)}目标怎么样了？
Dialogue: Marked=0,0:06:28.91,0:06:31.00,Default,,0000,0000,0000,,{\fad(050,050)}由于电波干扰，无法确认
Dialogue: Marked=0,0:06:31.82,0:06:34.20,Default,,0000,0000,0000,,{\fad(050,050)}那种大爆炸，一定解决了

Dialogue: Marked=0,0:06:31.65,0:06:34.20,BGS,,0000,0000,0000,,{\fad(100,100)}磁场干扰率降至 {\fs20}{\fnBitsumishi}78%

Dialogue: Marked=0,0:06:34.75,0:06:36.18,Default,,0000,0000,0000,,{\fad(050,100)}探测器恢复
Dialogue: Marked=0,0:06:37.35,0:06:39.12,Default,,0000,0000,0000,,{\fad(030,100)}爆炸中心有能量反应
Dialogue: Marked=0,0:06:39.25,0:06:40.22,Default,,0000,0000,0000,,{\fad(050,050)}什么？！
Dialogue: Marked=0,0:06:40.70,0:06:41.80,Default,,0000,0000,0000,,{\fad(050,100)}影像恢复
Dialogue: Marked=0,0:06:46.45,0:06:48.06,Default,,0000,0000,0000,,{\fad(050,050)}我们的王牌…


Dialogue: Marked=0,0:06:44.80,0:06:46.50,BGS,,0000,0000,0000,,{\fad(100,100)}对目标重新开始观测
Dialogue: Marked=0,0:06:46.50,0:06:49.20,BGS,,0000,0000,0000,,{\fad(100,100)}估算目标构成物质的  {\fs20}{\fnBitsumishi}18%{\fs22}{\fn方正综艺简体} 被溶解
Dialogue: Marked=0,0:06:49.40,0:06:51.50,BGS,,0000,0000,0000,,{\fad(100,100)}表面温度维持在 {\fs20}{\fnBitsumishi}3000{\fs22}{\fn方正综艺简体} 度
Dialogue: Marked=0,0:06:51.50,0:06:52.80,BGS,,0000,0000,0000,,{\fad(100,100)}无法进行 σ 射线确认

Dialogue: Marked=0,0:06:49.65,0:06:50.66,Default,,0000,0000,0000,,{\fad(050,050)}怎么会这样
Dialogue: Marked=0,0:06:51.45,0:06:52.47,Default,,0000,0000,0000,,{\fad(050,050)}该死的怪物
Dialogue: Marked=0,0:07:04.00,0:07:07.38,Default,,0000,0000,0000,,{\fad(050,050)}不用担心，我在最优先保护他的安全
Dialogue: Marked=0,0:07:07.85,0:07:09.70,Default,,0000,0000,0000,,{\fad(050,080)}那么帮我准备一下运输车吧
Dialogue: Marked=0,0:07:09.75,0:07:10.67,Default,,0000,0000,0000,,{\fad(050,050)}直达的那一种
Dialogue: Marked=0,0:07:11.85,0:07:12.45,Default,,0000,0000,0000,,{\fad(050,100)}对
Dialogue: Marked=0,0:07:13.05,0:07:15.20,Default,,0000,0000,0000,,{\fad(030,050)}毕竟是我自己说要去接他
Dialogue: Marked=0,0:07:15.40,0:07:16.69,Default,,0000,0000,0000,,{\fad(030,050)}我会好好负起责任的啦
Dialogue: Marked=0,0:07:17.00,0:07:17.50,Default,,0000,0000,0000,,{\fad(050,050)}先这样了
Dialogue: Marked=0,0:07:20.55,0:07:22.91,Default,,0000,0000,0005,,{\fad(050,100)}{\alpha 10}{\fs32}不过也真是倒楣
Dialogue: Marked=0,0:07:23.10,0:07:25.30,Default,,0000,0000,0005,,{\fad(050,100)}{\alpha 10}{\fs32}车子才刚修好而已
Dialogue: Marked=0,0:07:25.30,0:07:27.35,Default,,0000,0000,0005,,{\fad(050,100)}{\alpha 10}{\fs32}现在就已经烂得一蹋糊涂
Dialogue: Marked=0,0:07:27.35,0:07:30.60,Default,,0000,0000,0005,,{\fad(050,100)}{\alpha 10}{\fs32}贷款还有 33 期…外加修理费啊…
Dialogue: Marked=0,0:07:30.60,0:07:32.98,Default,,0000,0000,0005,,{\fad(050,100)}{\alpha 10}{\fs32}而且我最好的衣服也完蛋了
Dialogue: 0,0:07:33.13,0:07:34.64,Default,,0000,0000,0000,,{\fad(050,050)}那个…美里小姐…
Dialogue: 1,0:07:33.62,0:07:36.20,Default,,0000,0000,0005,,{\fad(050,100){\pos(350,538)}{\alpha 10}{\fs29}枉费我特地穿这件衣服来
Dialogue: Marked=0,0:07:37.51,0:07:39.00,Default,,0000,0000,0000,,{\fad(050,050)}那个…美里小姐
Dialogue: Marked=0,0:07:39.30,0:07:40.00,Default,,0000,0000,0000,,{\fad(050,050)}什么事？
Dialogue: Marked=0,0:07:40.70,0:07:43.30,Default,,0000,0000,0000,,{\fad(050,050)}这么做真的没有问题吗？
Dialogue: Marked=0,0:07:44.85,0:07:46.01,Default,,0000,0000,0000,,{\fad(000,050)}没关系没关系
Dialogue: Marked=0,0:07:46.15,0:07:47.50,Default,,0000,0000,0000,,{\fad(030,050)}现在是非常时期
Dialogue: Marked=0,0:07:47.70,0:07:49.63,Default,,0000,0000,0000,,{\fad(030,050)}为了发动车子这也是没办法嘛
Dialogue: Marked=0,0:07:49.80,0:07:50.99,Default,,0000,0000,0000,,{\fad(030,100)}还有…不要看我这样
Dialogue: Marked=0,0:07:51.00,0:07:53.16,Default,,0000,0000,0000,,{\fad(030,100)}好歹我也是国际公务员哦
Dialogue: Marked=0,0:07:53.50,0:07:55.04,Default,,0000,0000,0000,,{\fad(050,050)}万事 OK 啦
Dialogue: Marked=0,0:07:56.40,0:07:58.62,Default,,0000,0000,0000,,{\fad(020,100)}很缺乏说服力的借口呢
Dialogue: Marked=0,0:07:59.20,0:08:00.48,Default,,0000,0000,0000,,{\fad(020,100)}真没意思
Dialogue: Marked=0,0:08:01.10,0:08:03.25,Default,,0000,0000,0000,,{\fad(020,100)}长得可爱，却那么死板
Dialogue: Marked=0,0:08:04.03,0:08:05.36,Default,,0000,0000,0000,,{\fad(050,050)}是这样吗
Dialogue: Marked=0,0:08:05.75,0:08:06.71,Default,,0000,0000,0000,,{\fad(050,050)}怎么，生气啦
Dialogue: Marked=0,0:08:08.00,0:08:11.45,Default,,0000,0000,0000,,{\fad(030,100)}抱歉抱歉，毕竟是个男孩子呢
Dialogue: Marked=0,0:08:11.65,0:08:14.30,Default,,0000,0000,0000,,{\fad(020,100)}美里小姐才是，年纪不轻了还跟小孩子一样
Dialogue: Marked=0,0:08:20.60,0:08:23.40,Default,,0000,0000,0000,,{\fad(050,050)}和预料中的一样，正在进行自我修复


Dialogue: Marked=0,0:08:20.60,0:08:24.10,BGS,,0000,0000,0000,,{\fad(100,100)}将  {\fs20}{\fnBitsumishi}CASPER{\fs22}{\fn方正综艺简体} 的情况资料拷贝到 {\fs20}{\fnBitsumishi}MELCHIOR{\fs22}{\fn方正综艺简体} 上，验证工作请加快
Dialogue: Marked=0,0:08:24.10,0:08:27.80,BGS,,0000,0000,0000,,{\fad(100,100)}尽快报告 {\fs20}{\fnBitsumishi}BALTHASAR{\fs22}{\fn方正综艺简体} 的分析结果，此工作为最优先
Dialogue: Marked=0,0:08:27.90,0:08:30.10,BGS,,0000,0000,0000,,{\fad(100,100)}按阶段将结果上传，随时更新
Dialogue: Marked=0,0:08:30.20,0:08:33.60,BGS,,0000,0000,0000,,{\fad(100,100)}从 {\fs20}{\fnBitsumishi}23-28{\fs22}{\fn方正综艺简体} 的通讯回路全部切换为保密线路，至急
Dialogue: Marked=0,0:08:33.60,0:08:36.80,BGS,,0000,0000,0000,,{\fad(100,100)}距离 {\fs20}{\fnBitsumishi}1200{\fs22}{\fn方正综艺简体} 从 {\fs20}{\fnBitsumishi}E{\fs22}{\fn方正综艺简体} 到 {\fs20}{\fnBitsumishi}I{\fs22}{\fn方正综艺简体} 的切换开始
Dialogue: Marked=0,0:08:39.20,0:08:41.00,BGS,,0000,0000,0000,,{\fad(100,100)}切换完成，没有问题


Dialogue: Marked=0,0:08:24.10,0:08:27.40,Default,,0000,0000,0000,,{\fad(050,050)}独立武器不那样就没用了
Dialogue: Marked=0,0:08:30.25,0:08:32.63,Default,,0000,0000,0000,,{\fad(050,050)}噢，真是了不起
Dialogue: Marked=0,0:08:32.90,0:08:34.80,Default,,0000,0000,0000,,{\fad(050,050)}还能增强机能啊
Dialogue: Marked=0,0:08:35.40,0:08:37.24,Default,,0000,0000,0000,,{\fad(050,050)}经验好像也增长了
Dialogue: Marked=0,0:08:38.68,0:08:41.20,Default,,0000,0000,0000,,{\fad(050,050)}再度进攻也只是时间问题吧
Dialogue: Marked=0,0:08:42.88,0:08:45.61,BGS,,0000,0000,0000,,{\fad(100,100)}闸门即将关闭，请小心
Dialogue: Marked=0,0:08:46.17,0:08:47.47,BGS,,0000,0000,0000,,{\fad(100,100)}现在开车了
Dialogue: Marked=0,0:08:46.45,0:08:48.10,Default,,0000,0000,0000,,{\fad(050,050)}特务机关 {\fs30}{\fnBitsumishi}NERV{\fs35}{\fn方正粗宋简体} ？
Dialogue: Marked=0,0:08:48.15,0:08:51.20,Default,,0000,0000,0000,,{\fad(050,050)}对，联合国直属的非公开组织
Dialogue: Marked=0,0:08:48.25,0:08:52.50,BGS,,0000,0000,0000,,{\fad(100,100)}本电车为 {\fs20}{\fnBitsumishi}C-22{\fs22}{\fn方正综艺简体} 特别列车
Dialogue: Marked=0,0:08:52.50,0:08:56.50,BGS,,0000,0000,0000,,{\fad(100,100)}直达 {\fs20}{\fnBitsumishi}G-33{\fs22}{\fn方正综艺简体} ，途中不停车

Dialogue: Marked=0,0:08:51.65,0:08:53.19,Default,,0000,0000,0000,,{\fad(050,050)}我爸爸就在这里吗
Dialogue: Marked=0,0:08:53.55,0:08:56.33,Default,,0000,0000,0000,,{\fad(050,050)}对啊，你知道父亲在做什么工作吗
Dialogue: Marked=0,0:08:58.00,0:09:00.20,BGS,,0000,0000,0000,,{\fad(100,100)}途中全部不停车
Dialogue: Marked=0,0:09:00.50,0:09:01.80,BGS,,0000,0000,0000,,{\fad(100,100)}请注意
Dialogue: Marked=0,0:09:00.60,0:09:03.08,Default,,0000,0000,0000,,{\fad(050,100)}负责保护人类的重要工作…
Dialogue: Marked=0,0:09:03.08,0:09:04.55,Default,,0000,0000,0000,,{\fad(050,050)}从老师那边听来的


Dialogue: Marked=0,0:09:05.20,0:09:09.60,BGS,,0000,0000,0000,,{\fad(100,100)}根据从右翼指挥所传来的详细报告，许可其立即重新整编
Dialogue: Marked=0,0:09:10.20,0:09:16.00,BGS,,0000,0000,0000,,{\fad(100,100)}{\fs20}{\fnBitsumishi}6{\fs22}{\fn方正综艺简体} 号数据处理文件通过 {\fs20}{\fnBitsumishi}N{\fs22}{\fn方正综艺简体} 文件夹输入 {\fs20}{\fnBitsumishi}MAGI{\fs22}{\fn方正综艺简体} ，请加快
Dialogue: Marked=0,0:09:16.20,0:09:21.20,BGS,,0000,0000,0000,,{\fad(100,100)}本作战的初次备份在第 {\fs20}{\fnBitsumishi}37 BASE{\fs22}{\fn方正综艺简体} ，请锁定
Dialogue: Marked=0,0:09:21.20,0:09:25.60,BGS,,0000,0000,0000,,{\fad(100,100)}{\fs20}{\fnBitsumishi}827{\fs22}{\fn方正综艺简体} 区的封闭维持现状，第 {\fs20}{\fnBitsumishi}7{\fs22}{\fn方正综艺简体} 闸门在 2{\fs22}{\fn方正综艺简体} 分钟后开放
Dialogue: Marked=0,0:09:26.00,0:09:29.60,BGS,,0000,0000,0000,,{\fad(100,100)}复制  {\fs20}{\fnBitsumishi}MELCHIOR {\fs22}{\fn方正综艺简体}的 {\fs20}{\fnBitsumishi} 5 4 7 8 2 {\fs22}{\fn方正综艺简体}的数据


Dialogue: Marked=0,0:09:36.00,0:09:40.80,BGS,,0000,0000,0000,,{\fad(100,100)}第 {\fs20}{\fnBitsumishi}2{\fs22}{\fn方正综艺简体} 光学观测所来电，确认藤泽附近有若干磁场变化
Dialogue: Marked=0,0:09:40.90,0:09:46.40,BGS,,0000,0000,0000,,{\fad(100,100)}回复第 {\fs20}{\fnBitsumishi}2{\fs22}{\fn方正综艺简体} 光学观测所，继续观测，随时报告情况
Dialogue: Marked=0,0:09:47.00,0:09:50.40,BGS,,0000,0000,0000,,{\fad(100,100)}支援部队一直到整编为止在当前位置待命

Dialogue: Marked=0,0:09:07.40,0:09:10.60,Default,,0000,0000,0000,,{\fad(050,050)}现在起本作战的指挥权就移交给你了
Dialogue: Marked=0,0:09:10.90,0:09:12.60,Default,,0000,0000,0000,,{\fad(050,050)}让我们看看你的能力吧
Dialogue: Marked=0,0:09:12.70,0:09:13.60,Default,,0000,0000,0000,,{\fad(030,100)}明白
Dialogue: Marked=0,0:09:14.20,0:09:16.77,Default,,0000,0000,0000,,{\fad(050,050)}碇，我承认我们拥有的武器…
Dialogue: Marked=0,0:09:17.00,0:09:20.20,Default,,0000,0000,0000,,{\fad(050,050)}对目标毫无效果
Dialogue: Marked=0,0:09:21.00,0:09:23.66,Default,,0000,0000,0000,,{\fad(050,050)}但你的话能赢是吧
Dialogue: Marked=0,0:09:24.20,0:09:26.00,Default,,0000,0000,0000,,{\fad(050,050)}{\fs30}{\fnBitsumishi}NERV{\fs35}{\fn方正粗宋简体} 就是为此而成立的
Dialogue: Marked=0,0:09:26.55,0:09:27.86,Default,,0000,0000,0000,,{\fad(050,050)}我们拭目以待
Dialogue: Marked=0,0:09:29.85,0:09:31.60,Default,,0000,0000,0000,,{\fad(050,050)}目标仍然没有变化
Dialogue: Marked=0,0:09:32.00,0:09:35.20,Default,,0000,0000,0000,,{\fad(050,050)}现在迎击系统的运作率是 {\fs30}{\fnBitsumishi}7.5%
Dialogue: Marked=0,0:09:37.00,0:09:39.00,Default,,0000,0000,0000,,{\fad(050,050)}联合国军也束手无策了吗
Dialogue: Marked=0,0:09:39.35,0:09:40.40,Default,,0000,0000,0000,,{\fad(050,050)}你打算怎么做
Dialogue: Marked=0,0:09:41.40,0:09:43.00,Default,,0000,0000,0000,,{\fad(020,050)}让初号机启动
Dialogue: Marked=0,0:09:43.49,0:09:44.90,Default,,0000,0000,0000,,{\fad(020,100)}初号机吗
Dialogue: Marked=0,0:09:45.12,0:09:46.90,Default,,0000,0000,0000,,{\fad(020,100)}没有驾驶员啊

Dialogue: Marked=0,0:09:47.40,0:09:50.80,Default,,0000,0000,0000,,{\fad(050,050)}没问题，另一个预备人员就快送到了
Dialogue: Marked=0,0:09:51.80,0:09:54.40,Default,,0000,0000,0000,,{\fad(050,050)}现在要去爸爸那里吗
Dialogue: Marked=0,0:09:55.03,0:09:57.00,Default,,0000,0000,0000,,{\fad(050,050)}是啊，是会那样
Dialogue: Marked=0,0:10:01.20,0:10:02.10,Default,,0000,0000,0000,,{\fad(050,100)}爸爸…
Dialogue: Marked=0,0:10:04.30,0:10:07.19,Default,,0000,0000,0000,,{\fad(050,050)}对了，你从父亲那里拿到 {\fs30}{\fnBitsumishi}ID{\fs35}{\fn方正粗宋简体} 卡了吧
Dialogue: Marked=0,0:10:09.50,0:10:09.96,Default,,0000,0000,0000,,{\fad(050,200)}是
Dialogue: Marked=0,0:10:12.07,0:10:12.60,Default,,0000,0000,0000,,{\fad(050,100)}请看
Dialogue: Marked=0,0:10:13.00,0:10:13.76,Default,,0000,0000,0000,,{\fad(050,100)}谢谢
Dialogue: Marked=0,0:10:15.80,0:10:18.30,Default,,0000,0000,0000,,{\fad(050,050)}那这个你拿去看一下吧
Dialogue: Marked=0,0:10:18.80,0:10:19.80,Default,,0000,0000,0008,,{\fad(050,050)}{\fs30}{\fnBitsumishi}NERV{\fs35}{\fn方正粗宋简体} ？
Dialogue: Marked=0,0:10:20.80,0:10:22.36,Default,,0000,0000,0000,,{\fad(050,050)}爸爸的工作…
Dialogue: Marked=0,0:10:22.80,0:10:24.80,Default,,0000,0000,0000,,{\fad(020,050)}是要我做什么吗
Dialogue: Marked=0,0:10:27.10,0:10:28.20,Default,,0000,0000,0000,,{\fad(040,100)}也是…
Dialogue: Marked=0,0:10:28.71,0:10:32.60,Default,,0000,0000,0000,,{\fad(050,100)}没事的话，爸爸怎么会写信给我
Dialogue: Marked=0,0:10:33.10,0:10:36.40,Default,,0000,0000,0000,,{\fad(050,100)}原来如此，不擅长跟父亲打交道吧
Dialogue: Marked=0,0:10:37.40,0:10:38.84,Default,,0000,0000,0000,,{\fad(050,100)}跟我一样呢
Dialogue: Marked=0,0:10:45.24,0:10:46.10,Default,,0000,0000,0000,,{\fad(050,050)}好棒
Dialogue: 1,0:10:47.40,0:10:49.00,Default,,0000,0000,0010,,{\fad(050,050)}{\fs23}{\fnBitsumishi}GEO FRONT
Dialogue: 0,0:10:47.40,0:10:49.00,Default,,0000,0000,0000,,{\fad(050,050)}真的是地下都市啊
Dialogue: Marked=0,0:10:49.40,0:10:52.44,Default,,0000,0000,0000,,{\fad(050,050)}对，这就是我们的秘密基地
Dialogue: Marked=0,0:10:52.60,0:10:53.50,Default,,0000,0000,0000,,{\fad(050,100)}{\fs30}{\fnBitsumishi}NERV{\fs35}{\fn方正粗宋简体} 总部
Dialogue: Marked=0,0:10:54.00,0:10:55.85,Default,,0000,0000,0000,,{\fad(050,100)}重建世界的关键…
Dialogue: Marked=0,0:10:55.85,0:10:58.40,Default,,0000,0000,0000,,{\fad(050,050)}人类的堡垒哦
Dialogue: Marked=0,0:11:05.40,0:11:07.10,Default,,0000,0000,0000,,{\fad(050,050)}好奇怪啊
Dialogue: Marked=0,0:11:07.80,0:11:09.96,Default,,0000,0000,0000,,{\fad(050,050)}应该是这条路的啊

Dialogue: Marked=0,0:11:10.75,0:11:13.60,BGS,,0000,0000,0000,,{\fad(100,100)}中央教条的通路封闭，维持现状
Dialogue: Marked=0,0:11:13.92,0:11:17.30,BGS,,0000,0000,0000,,{\fad(100,100)}{\fs20}{\fnBitsumishi}B-26{\fs22}{\fn方正综艺简体} 区请照顺序开放
Dialogue: Marked=0,0:11:17.78,0:11:21.00,BGS,,0000,0000,0000,,{\fad(100,100)}到第 {\fs20}{\fnBitsumishi}2{\fs22}{\fn方正综艺简体} 层为止保持第 {\fs20}{\fnBitsumishi}4{\fs22}{\fn方正综艺简体} 级警戒态势
Dialogue: Marked=0,0:11:21.35,0:11:23.53,BGS,,0000,0000,0000,,{\fad(100,100)}重新确认各区的安全锁
Dialogue: Marked=0,0:11:23.76,0:11:28.87,BGS,,0000,0000,0000,,{\fad(100,100)}{\fs20}{\fnBitsumishi}SIGMA{\fs22}{\fn方正综艺简体} 单元现在完全封闭，请利用 {\fs20}{\fnBitsumishi}22-26{\fs22}{\fn方正综艺简体} 迂回路线

Dialogue: Marked=0,0:11:12.40,0:11:15.00,Default,,0000,0000,0000,,{\fad(050,050)}就是因为这样这里才不适合穿裙子啊
Dialogue: Marked=0,0:11:15.45,0:11:18.20,Default,,0000,0000,0000,,{\fad(050,050)}不过律子到底在哪里啊
Dialogue: Marked=0,0:11:18.80,0:11:21.00,Default,,0000,0000,0000,,{\fad(050,050)}不好意思哦，我还不习惯这里
Dialogue: Marked=0,0:11:21.20,0:11:22.80,Default,,0000,0000,0000,,{\fad(050,050)}这里刚才已经走过了
Dialogue: Marked=0,0:11:25.00,0:11:29.00,Default,,0000,0000,0000,,{\fad(050,050)}不过不要紧啦，系统就是为了让人利用才有的嘛
Dialogue: Marked=0,0:11:29.25,0:11:30.40,Default,,0000,0000,0000,,{\fad(050,100)}技术部一课
Dialogue: Marked=0,0:11:30.46,0:11:33.35,Default,,0000,0000,0000,,{\fad(050,100)}{\fs30}{\fnBitsumishi}E{\fs35}{\fn方正粗宋简体} 计划负责人赤木律子博士
Dialogue: Marked=0,0:11:33.46,0:11:34.55,Default,,0000,0000,0000,,{\fad(050,100)}赤木律子博士
Dialogue: Marked=0,0:11:35.15,0:11:39.40,Default,,0000,0000,0000,,{\fad(050,100)}请速与作战部一课的葛城美里一尉联络
Dialogue: Marked=0,0:11:39.90,0:11:42.40,Default,,0000,0000,0000,,{\fad(050,050)}真伤脑筋，又迷路了啊
Dialogue: Marked=0,0:11:47.45,0:11:48.80,Default,,0000,0000,0000,,{\fad(200,200)}哎呀，律子…
Dialogue: Marked=0,0:11:54.00,0:11:55.87,Default,,0000,0000,0000,,{\fad(050,050)}在做什么呢？葛城一尉
Dialogue: Marked=0,0:11:56.40,0:11:58.39,Default,,0000,0000,0000,,{\fad(050,050)}现在不但人手不足，时间也很紧张
Dialogue: Marked=0,0:11:59.10,0:11:59.70,Default,,0000,0000,0000,,{\fad(080,100)}抱歉
Dialogue: Marked=0,0:12:03.40,0:12:05.00,Default,,0000,0000,0000,,{\fad(050,050)}他就是那个男孩吧？
Dialogue: Marked=0,0:12:05.40,0:12:08.00,Default,,0000,0000,0000,,{\fad(100,050)}对，根据马尔杜克报告书选出的

Dialogue: 0,0:12:08.00,0:12:09.30,Default,,0000,0000,0010,,{\fad(080,100)}{\fs23}{\fnBitsumishi}THIRD CHILDREN
Dialogue: 1,0:12:08.00,0:12:09.30,Default,,0000,0000,0000,,{\fad(080,100)}第三适格者
{\pos(272,490)}
Dialogue: Marked=0,0:12:10.00,0:12:10.90,Default,,0000,0000,0000,,{\fad(050,050)}请多指教了
Dialogue: Marked=0,0:12:12.00,0:12:12.55,Default,,0000,0000,0000,,{\fad(100,100)}是
Dialogue: Marked=0,0:12:13.10,0:12:15.55,Default,,0000,0000,0000,,{\fad(050,050)}这孩子跟他父亲一模一样呢
Dialogue: Marked=0,0:12:15.80,0:12:17.74,Default,,0000,0000,0000,,{\fad(050,050)}比如不可爱这一点
Dialogue: Marked=0,0:12:18.15,0:12:19.61,Default,,0000,0000,0000,,{\fad(050,050)}那么接下来就拜托了


Dialogue: Marked=0,0:12:18.00,0:12:25.50,BGS,,0000,0000,0000,,{\fad(100,100)}第 {\fs20}{\fnBitsumishi}2{\fs22}{\fn方正综艺简体} 光学观测所报告，目标体内温度正在上升，有重新活动迹象
Dialogue: Marked=0,0:12:25.50,0:12:30.00,BGS,,0000,0000,0000,,{\fad(100,100)}爆炸中心地区上空电压产生变化，正离子急剧增加
Dialogue: Marked=0,0:12:30.12,0:12:33.92,BGS,,0000,0000,0000,,{\fad(100,100)}重新与第 {\fs20}{\fnBitsumishi}6{\fs22}{\fn方正综艺简体} 卫星连线，正在自动追踪目标


Dialogue: Marked=0,0:12:24.20,0:12:26.20,Default,,0000,0000,0000,,{\fad(050,050)}隔了 3 年的重逢啊
Dialogue: Marked=0,0:12:27.40,0:12:28.40,Default,,0000,0000,0000,,{\fad(050,100)}副司令
Dialogue: Marked=0,0:12:28.80,0:12:30.80,Default,,0000,0000,0000,,{\fad(050,050)}目标再度开始移动了
Dialogue: Marked=0,0:12:31.20,0:12:34.20,Default,,0000,0000,0000,,{\fad(050,050)}好，全体人员进入第一战斗位置
Dialogue: Marked=0,0:12:34.60,0:12:37.72,Default,,0000,0000,0000,,{\fad(050,050)}再重复一次，全体人员进入第一战斗位置
Dialogue: Marked=0,0:12:37.95,0:12:39.25,Default,,0000,0000,0000,,{\fad(050,050)}准备对地迎击战
Dialogue: Marked=0,0:12:39.60,0:12:40.70,Default,,0000,0000,0000,,{\fad(050,050)}听听
Dialogue: Marked=0,0:12:40.80,0:12:42.40,Default,,0000,0000,0000,,{\fad(050,050)}大难临头了呢
Dialogue: Marked=0,0:12:43.20,0:12:45.43,Default,,0000,0000,0000,,{\fad(050,050)}对了，初号机怎样了
Dialogue: Marked=0,0:12:45.55,0:12:47.75,Default,,0000,0000,0000,,{\fad(050,050)}保持 {\fs30}{\fnBitsumishi}B{\fs35}{\fn方正粗宋简体} 型装备，现正冷却中
Dialogue: Marked=0,0:12:47.90,0:12:49.40,Default,,0000,0000,0000,,{\fad(050,050)}那东西真的能动吗
Dialogue: Marked=0,0:12:49.70,0:12:51.75,Default,,0000,0000,0000,,{\fad(050,050)}不是一次都没有动过吗
Dialogue: Marked=0,0:12:51.80,0:12:57.11,Default,,0000,0000,0000,,{\fad(050,050)}启动机率是 {\fs30}{\fnBitsumishi}0.0000000{\fsp 4}01%
Dialogue: Marked=0,0:12:57.45,0:12:59.80,Default,,0000,0000,0000,,{\fad(050,050)}叫它 {\fs30}{\fnBitsumishi}09{\fs35}{\fn方正粗宋简体} 系统真是讽刺
Dialogue: Marked=0,0:13:00.00,0:13:02.60,Default,,0000,0000,0000,,{\fad(050,050)}那不就是根本动不了吗
Dialogue: Marked=0,0:13:02.60,0:13:05.05,Default,,0000,0000,0000,,{\fad(050,050)}太失礼了吧，又还不到“{\fs30}{\fnBitsumishi}0{\fs35}{\fn方正粗宋简体}”
Dialogue: Marked=0,0:13:05.15,0:13:06.65,Default,,0000,0000,0000,,{\fad(050,050)}以数字上来说是这样啦
Dialogue: Marked=0,0:13:07.00,0:13:08.65,Default,,0000,0000,0000,,{\fad(050,050)}总之，不管怎么说
Dialogue: Marked=0,0:13:08.78,0:13:11.60,Default,,0000,0000,0000,,{\fad(050,050)}一句“启动不了”可不行呢
Dialogue: Marked=0,0:13:20.00,0:13:22.00,Default,,0000,0000,0000,,{\fad(050,100)}那…那个…
Dialogue: Marked=0,0:13:22.10,0:13:23.00,Default,,0000,0000,0000,,{\fad(050,050)}变得一片漆黑了
Dialogue: Marked=0,0:13:26.45,0:13:27.70,Default,,0000,0000,0000,,{\fad(050,050)}脸？
Dialogue: Marked=0,0:13:27.70,0:13:29.40,Default,,0000,0000,0000,,{\fad(050,050)}巨大的机器人？
Dialogue: Marked=0,0:13:31.00,0:13:33.06,Default,,0000,0000,0000,,{\fad(050,050)}不用找了，根本没收录进去
Dialogue: Marked=0,0:13:33.80,0:13:37.70,Default,,0000,0000,0000,,{\fad(050,050)}这是由人类所制造的终极泛用人型决战兵器…
Dialogue: Marked=0,0:13:37.82,0:13:40.05,Default,,0000,0000,0000,,{\fad(050,050)}人造人 {\fs28}{\fnBitsumishi}EVANGELION
Dialogue: Marked=0,0:13:40.20,0:13:41.72,Default,,0000,0000,0000,,{\fad(050,050)}这个初号机
Dialogue: Marked=0,0:13:42.00,0:13:44.34,Default,,0000,0000,0000,,{\fad(050,050)}是在极其机密的情况下制造的
Dialogue: Marked=0,0:13:44.55,0:13:47.15,Default,,0000,0000,0000,,{\fad(050,050)}我们人类最后的王牌哦
Dialogue: Marked=0,0:13:47.20,0:13:49.00,Default,,0000,0000,0000,,{\fad(050,050)}这也是爸爸的工作吗
Dialogue: Marked=0,0:13:49.00,0:13:49.95,Default,,0000,0000,0000,,{\fad(100,100)}没错
Dialogue: Marked=0,0:13:51.85,0:13:53.20,Default,,0000,0000,0000,,{\fad(050,050)}好久不见了
Dialogue: Marked=0,0:13:54.60,0:13:55.60,Default,,0000,0000,0000,,{\fad(100,100)}爸爸…
Dialogue: Marked=0,0:13:58.48,0:13:59.60,Default,,0000,0000,0000,,{\fad(020,100)}出击
Dialogue: Marked=0,0:14:00.00,0:14:01.30,Default,,0000,0000,0000,,{\fad(020,100)}出击？
Dialogue: Marked=0,0:14:01.30,0:14:03.40,Default,,0000,0000,0000,,{\fad(050,100)}零号机不是还在冻结中吗
Dialogue: Marked=0,0:14:05.20,0:14:07.74,Default,,0000,0000,0000,,{\fad(050,050)}难道…想用初号机吗
Dialogue: Marked=0,0:14:08.20,0:14:09.40,Default,,0000,0000,0000,,{\fad(050,050)}没有其他选择了
Dialogue: Marked=0,0:14:09.80,0:14:12.80,Default,,0000,0000,0000,,{\fad(050,050)}等等…丽还不能行动吧
Dialogue: Marked=0,0:14:13.60,0:14:15.10,Default,,0000,0000,0000,,{\fad(050,050)}没有驾驶员啊
Dialogue: Marked=0,0:14:16.00,0:14:17.24,Default,,0000,0000,0000,,{\fad(050,050)}刚才已经到了
Dialogue: Marked=0,0:14:18.20,0:14:19.49,Default,,0000,0000,0000,,{\fad(050,050)}认真的吗
Dialogue: Marked=0,0:14:20.40,0:14:21.40,Default,,0000,0000,0000,,{\fad(050,050)}碇真嗣
Dialogue: Marked=0,0:14:21.60,0:14:22.30,Default,,0000,0000,0000,,{\fad(050,100)}是
Dialogue: Marked=0,0:14:22.60,0:14:24.00,Default,,0000,0000,0000,,{\fad(050,050)}是你要坐上去哦
Dialogue: Marked=0,0:14:24.60,0:14:29.52,Default,,0000,0000,0000,,{\fad(050,100)}但绫波丽和 {\fs30}{\fnBitsumishi}EVA{\fs35}{\fn方正粗宋简体} 同步都花了 7 个月
Dialogue: Marked=0,0:14:29.70,0:14:32.45,Default,,0000,0000,0000,,{\fad(050,050)}刚来的他根本办不到
Dialogue: Marked=0,0:14:32.45,0:14:33.75,Default,,0000,0000,0000,,{\fad(050,050)}只要坐上去就可以了
Dialogue: Marked=0,0:14:33.80,0:14:35.25,Default,,0000,0000,0000,,{\fad(050,050)}并不期待更多
Dialogue: Marked=0,0:14:35.25,0:14:35.80,Default,,0000,0000,0000,,{\fad(050,100)}可是…
Dialogue: Marked=0,0:14:36.20,0:14:38.90,Default,,0000,0000,0000,,{\fad(050,050)}击退使徒是我们现在的首要任务
Dialogue: Marked=0,0:14:39.60,0:14:44.20,Default,,0000,0000,0000,,{\fad(050,050)}为此我们除了让稍微有机会\N能与 {\fs30}{\fnBitsumishi}EVA{\fs35}{\fn方正粗宋简体} 同步的人坐上去外
Dialogue: Marked=0,0:14:44.25,0:14:45.60,Default,,0000,0000,0000,,{\fad(050,050)}别无他法
Dialogue: Marked=0,0:14:46.70,0:14:48.67,Default,,0000,0000,0000,,{\fad(050,050)}这点你也应该明白的，葛城一尉
Dialogue: Marked=0,0:14:51.15,0:14:52.30,Default,,0000,0000,0000,,{\fad(100,100)}是啊…
Dialogue: Marked=0,0:14:54.00,0:14:56.20,Default,,0000,0000,0000,,{\fad(050,050)}爸爸，为什么叫我来
Dialogue: Marked=0,0:14:56.60,0:14:58.40,Default,,0000,0000,0000,,{\fad(050,050)}就和你想的一样
Dialogue: Marked=0,0:14:58.80,0:15:02.60,Default,,0000,0000,0000,,{\fad(050,050)}那你是要我乘上这个，跟刚才那个东西战斗吗
Dialogue: Marked=0,0:15:03.10,0:15:04.00,Default,,0000,0000,0000,,{\fad(050,100)}没错
Dialogue: Marked=0,0:15:04.35,0:15:05.61,Default,,0000,0000,0000,,{\fad(050,050)}那种事我才不要
Dialogue: Marked=0,0:15:06.00,0:15:07.42,Default,,0000,0000,0000,,{\fad(050,050)}为什么现在才要我来
Dialogue: Marked=0,0:15:07.80,0:15:10.20,Default,,0000,0000,0000,,{\fad(050,050)}爸爸不是不需要我了吗
Dialogue: Marked=0,0:15:10.60,0:15:12.60,Default,,0000,0000,0000,,{\fad(050,050)}就是因为需要才叫你来
Dialogue: Marked=0,0:15:15.30,0:15:16.80,Default,,0000,0000,0000,,{\fad(050,050)}为什么要我
Dialogue: Marked=0,0:15:17.20,0:15:19.60,Default,,0000,0000,0000,,{\fad(050,050)}因为其他人办不到
Dialogue: Marked=0,0:15:20.20,0:15:21.70,Default,,0000,0000,0000,,{\fad(020,050)}办不到的…那样的事
Dialogue: Marked=0,0:15:22.40,0:15:24.40,Default,,0000,0000,0000,,{\fad(020,050)}看也没看过，听也没听过
Dialogue: Marked=0,0:15:24.65,0:15:25.90,Default,,0000,0000,0000,,{\fad(020,050)}怎么可能办得到
Dialogue: Marked=0,0:15:27.00,0:15:28.20,Default,,0000,0000,0000,,{\fad(020,050)}去听说明
Dialogue: Marked=0,0:15:29.15,0:15:32.60,Default,,0000,0000,0000,,{\fad(020,050)}什么啊…办不到的
Dialogue: Marked=0,0:15:33.65,0:15:35.60,Default,,0000,0000,0000,,{\fad(050,050)}我怎么可能会驾驶这种东西
Dialogue: Marked=0,0:15:37.00,0:15:38.55,Default,,0000,0000,0000,,{\fad(050,100)}要坐就快上去
Dialogue: Marked=0,0:15:38.55,0:15:40.00,Default,,0000,0000,0000,,{\fad(050,050)}不然就给我滚
Dialogue: Marked=0,0:15:51.80,0:15:54.00,Default,,0000,0000,0000,,{\fad(050,050)}被那家伙发现这里了吗
背景声：
Dialogue: Marked=0,0:15:55.65,0:15:58.60,BGS,,0000,0000,0000,,{\fad(150,150)}第  {\fs20}{\fnBitsumishi}1{\fs22}{\fn方正综艺简体}  层，第 {\fs21}{\fnBitsumishi}8{\fs22}{\fn方正综艺简体} 号装甲板损坏
Dialogue: Marked=0,0:16:00.00,0:16:04.65,BGS,,0000,0000,0000,,{\fad(150,150)}{\fs20}{\fnBitsumishi}D{\fs22}{\fn方正综艺简体} 区各所发生火灾，指定区域内的所有道路紧急封闭

Dialogue: Marked=0,0:15:58.00,0:16:00.00,Default,,0000,0000,0000,,{\fad(050,050)}真嗣，已经没有时间了
Dialogue: Marked=0,0:16:04.90,0:16:06.00,Default,,0000,0000,0000,,{\fad(050,050)}坐上去吧
Dialogue: Marked=0,0:16:07.30,0:16:08.20,Default,,0000,0000,0000,,{\fad(050,050)}不要…
Dialogue: Marked=0,0:16:08.57,0:16:10.02,Default,,0000,0000,0000,,{\fad(050,050)}特地来的…
Dialogue: Marked=0,0:16:10.66,0:16:11.80,Default,,0000,0000,0000,,{\fad(050,050)}不应该是这样的
Dialogue: Marked=0,0:16:13.20,0:16:16.80,Default,,0000,0000,0000,,{\fad(050,050)}真嗣，你是为了什么而来到这里的
Dialogue: Marked=0,0:16:18.20,0:16:21.10,Default,,0000,0000,0000,,{\fad(050,100)}不能逃避…从你父亲面前
Dialogue: Marked=0,0:16:21.10,0:16:22.60,Default,,0000,0000,0000,,{\fad(100,050)}更重要的是不可以逃避你自己
Dialogue: Marked=0,0:16:23.26,0:16:24.54,Default,,0000,0000,0000,,{\fad(050,100)}我知道…
Dialogue: Marked=0,0:16:24.60,0:16:27.25,Default,,0000,0000,0000,,{\fad(050,050)}但是…我根本不行的啊
Dialogue: Marked=0,0:16:35.50,0:16:36.27,Default,,0000,0000,0000,,{\fad(050,100)}冬月
Dialogue: Marked=0,0:16:37.60,0:16:39.02,Default,,0000,0000,0000,,{\fad(050,050)}让丽起来
Dialogue: Marked=0,0:16:39.18,0:16:40.20,Default,,0000,0000,0000,,{\fad(050,050)}她能行吗
Dialogue: Marked=0,0:16:40.60,0:16:42.40,Default,,0000,0000,0000,,{\fad(050,050)}又不是死了
Dialogue: Marked=0,0:16:43.40,0:16:44.40,Default,,0000,0000,0000,,{\fad(050,050)}我知道了
Dialogue: Marked=0,0:16:46.20,0:16:46.87,Default,,0000,0000,0000,,{\fad(050,100)}丽
Dialogue: Marked=0,0:16:47.00,0:16:48.10,Default,,0000,0000,0000,,{\fad(150,150)}是
Dialogue: Marked=0,0:16:48.10,0:16:50.80,Default,,0000,0000,0000,,{\fad(050,050)}预备人员不能用了，再来一次
Dialogue: Marked=0,0:16:51.00,0:16:51.70,Default,,0000,0000,0000,,{\fad(150,150)}是
Dialogue: Marked=0,0:16:54.46,0:16:56.75,Default,,0000,0000,0000,,{\fad(050,100)}将初号机的系统改为丽的配置
Dialogue: Marked=0,0:16:56.90,0:16:57.72,Default,,0000,0000,0000,,{\fad(020,080)}重新启动
Dialogue: Marked=0,0:16:57.90,0:17:01.00,Default,,0000,0000,0000,,{\fad(000,050)}明白，中断原作业，进行重启
Dialogue: Marked=0,0:17:02.80,0:17:06.60,Default,,0000,0000,0000,,{\fad(050,050)}果然我是不需要的人
Dialogue: Marked=0,0:17:40.55,0:17:41.30,Default,,0000,0000,0000,,{\fad(000,100)}危险！
Dialogue: Marked=0,0:17:51.65,0:17:52.80,Default,,0000,0000,0000,,{\fad(050,100)}{\fs30}{\fnBitsumishi}EVA{\fs35}{\fn方正粗宋简体} 动了
Dialogue: Marked=0,0:17:52.80,0:17:54.00,Default,,0000,0000,0000,,{\fad(030,100)}这是怎么回事
Dialogue: Marked=0,0:17:54.00,0:17:56.20,Default,,0000,0000,0000,,{\fad(030,050)}右手的拘束器被扯开了
Dialogue: Marked=0,0:17:56.35,0:17:57.89,Default,,0000,0000,0000,,{\fad(000,050)}不会吧！不可能的

Dialogue: Marked=0,0:17:56.40,0:17:57.89,BGS,,0000,0000,0000,,{\fad(100,100)}启动系统没有异常
Dialogue: Marked=0,0:17:58.20,0:18:00.40,BGS,,0000,0000,0000,,{\fad(100,100)}内部神经连接，无法确认

Dialogue: Marked=0,0:17:58.50,0:18:00.40,Default,,0000,0000,0000,,{\fad(050,050)}连 {\fs28}{\fnBitsumishi}ENTRY PLUG{\fs35}{\fn方正粗宋简体} 都还没插入
Dialogue: Marked=0,0:18:00.60,0:18:01.70,Default,,0000,0000,0000,,{\fad(050,050)}不可能会动的啊
Dialogue: Marked=0,0:18:03.00,0:18:05.20,Default,,0000,0000,0000,,{\fad(050,050)}连接口设备都没有居然会有反应
Dialogue: Marked=0,0:18:06.00,0:18:09.00,Default,,0000,0000,0000,,{\fad(050,050)}不如说…是保护了他？
Dialogue: Marked=0,0:18:10.20,0:18:11.20,Default,,0000,0000,0000,,{\fad(020,050)}能行
Dialogue: Marked=0,0:18:32.53,0:18:33.20,Default,,0000,0000,0000,,{\fad(000,100)}{\alpha 90}不能逃避
Dialogue: Marked=0,0:18:33.70,0:18:34.50,Default,,0000,0000,0000,,{\fad(000,100)}{\alpha 80}不能逃避
Dialogue: Marked=0,0:18:34.85,0:18:35.50,Default,,0000,0000,0000,,{\fad(000,100)}{\alpha 60}不能逃避
Dialogue: Marked=0,0:18:35.70,0:18:36.50,Default,,0000,0000,0000,,{\fad(000,100)}{\alpha 40}不能逃避
Dialogue: Marked=0,0:18:37.00,0:18:38.00,Default,,0000,0000,0000,,{\fad(050,050)}不能逃避
Dialogue: Marked=0,0:18:39.67,0:18:40.60,Default,,0000,0000,0000,,{\fad(050,050)}我做
Dialogue: Marked=0,0:18:41.20,0:18:42.20,Default,,0000,0000,0000,,{\fad(050,050)}我来驾驶
Dialogue: Marked=0,0:18:45.80,0:18:47.00,Default,,0000,0000,0000,,{\fad(050,100)}冷却完毕
Dialogue: Marked=0,0:18:47.20,0:18:48.60,Default,,0000,0000,0000,,{\fad(050,100)}右腕重新固定完成
Dialogue: Marked=0,0:18:48.80,0:18:50.70,Default,,0000,0000,0000,,{\fad(050,050)}机架内所有对接位无误
Dialogue: Marked=0,0:18:50.80,0:18:51.50,Default,,0000,0000,0000,,{\fad(000,100)}明白
Dialogue: Marked=0,0:18:51.60,0:18:54.60,Default,,0000,0000,0000,,{\fad(050,050)}停止信号插头已经排出
Dialogue: Marked=0,0:18:55.00,0:18:57.10,Default,,0000,0000,0000,,{\fad(050,050)}明白，插入 {\fs28}{\fnBitsumishi}ENTRY PLUG
Dialogue: Marked=0,0:18:57.45,0:19:01.00,Default,,0000,0000,0000,,{\fad(050,100)}开放脊椎传导系统，准备连接
Dialogue: Marked=0,0:19:04.75,0:19:06.00,Default,,0000,0000,0000,,{\fad(050,100)}插头固定完毕
Dialogue: Marked=0,0:19:06.40,0:19:08.00,Default,,0000,0000,0000,,{\fad(050,100)}开始第一次接触
Dialogue: Marked=0,0:19:13.00,0:19:14.62,Default,,0000,0000,0000,,{\fad(050,100)}{\fs28}{\fnBitsumishi}ENTRY PLUG{\fs35}{\fn方正粗宋简体} 注水
Dialogue: Marked=0,0:19:16.00,0:19:17.20,Default,,0000,0000,0000,,{\fad(050,050)}这是什么啊？
Dialogue: Marked=0,0:19:21.25,0:19:22.10,Default,,0000,0000,0000,,{\fad(050,050)}没关系
Dialogue: Marked=0,0:19:22.35,0:19:24.32,Default,,0000,0000,0000,,{\fad(050,050)}肺内充满 {\fs30}{\fnBitsumishi}LCL{\fs35}{\fn方正粗宋简体}后
Dialogue: Marked=0,0:19:24.32,0:19:26.80,Default,,0000,0000,0000,,{\fad(050,100)}血液能直接取得所需的氧气

Dialogue: Marked=0,0:19:20.85,0:19:23.91,BGS,,0000,0000,0000,,{\fad(100,100)}插头内注水中，距离满充还有 {\fs20}{\fnBitsumishi}20
Dialogue: Marked=0,0:19:24.00,0:19:27.50,BGS,,0000,0000,0000,,{\fad(100,100)}{\fs20}{\fnBitsumishi}LCL{\fs22}{\fn方正综艺简体} 浓度没有异常，压力正常

Dialogue: Marked=0,0:19:27.10,0:19:28.30,Default,,0000,0000,0000,,{\fad(050,100)}很快就会习惯的
Dialogue: Marked=0,0:19:31.85,0:19:33.20,Default,,0000,0000,0000,,{\fad(050,100)}好难受
Dialogue: Marked=0,0:19:33.20,0:19:35.50,Default,,0000,0000,0000,,{\fad(050,100)}忍耐一下！你是男孩子吧
Dialogue: Marked=0,0:19:36.90,0:19:38.10,Default,,0000,0000,0000,,{\fad(050,000)}主电源接通
Dialogue: Marked=0,0:19:38.10,0:19:40.75,Default,,0000,0000,0000,,{\fad(000,050)}动力传送至所有回路，没有问题
Dialogue: Marked=0,0:19:40.80,0:19:41.40,Default,,0000,0000,0000,,{\fad(000,100)}明白
Dialogue: Marked=0,0:19:41.40,0:19:43.40,Default,,0000,0000,0000,,{\fad(100,100)}进行第二次接触

Dialogue: 1,0:19:44.55,0:19:47.00,Default,,0000,0000,0000,,{\fad(100,100)}{\fs35}{\fn方正综艺简体}A {\fs35}{\fn方正粗宋简体}  神经连接无异常
Dialogue: 0,0:19:44.55,0:19:47.00,Default,,0000,0000,0000,,{\fad(100,100)}{\pos(270,490)}{\fs18}{\fnBitsumishi}10

Dialogue: Marked=0,0:19:47.40,0:19:49.10,BGS,,0000,0000,0010,,{\fad(100,100)}{\fs22}{\fnBitsumishi}LCL{\fs25}{\fn方正综艺简体} 电量正常
Dialogue: Marked=0,0:19:49.20,0:19:52.40,Default,,0000,0000,0000,,{\fad(050,100)}思考形态以日语为基础原则
Dialogue: Marked=0,0:19:53.20,0:19:55.60,Default,,0000,0000,0000,,{\fad(050,100)}初期接触没有任何问题
Dialogue: Marked=0,0:19:55.70,0:19:57.60,Default,,0000,0000,0000,,{\fad(050,100)}双向回路开通
Dialogue: Marked=0,0:19:58.00,0:20:00.60,Default,,0000,0000,0070,,{\fad(050,100)}同步率 {\fs30}{\fnBitsumishi}41.3%
Dialogue: Marked=0,0:20:01.20,0:20:02.00,Default,,0000,0000,0000,,{\fad(050,050)}好厉害
Dialogue: Marked=0,0:20:02.40,0:20:04.60,Default,,0000,0000,0000,,{\fad(050,100)}谐波均为正常值


Dialogue: Marked=0,0:20:01.20,0:20:04.12,BGS,,0000,0000,0000,,{\fad(100,100)}内部电压维持现状，充电中
Dialogue: Marked=0,0:20:04.15,0:20:06.98,BGS,,0000,0000,0000,,{\fad(100,100)}各部联动系统，确认运作

Dialogue: Marked=0,0:20:04.70,0:20:06.30,Default,,0000,0000,0000,,{\fad(050,100)}没有失控现象
Dialogue: Marked=0,0:20:06.80,0:20:07.50,Default,,0000,0000,0000,,{\fad(050,050)}可以了
Dialogue: Marked=0,0:20:09.20,0:20:10.60,Default,,0000,0000,0000,,{\fad(020,100)}准备射出
Dialogue: Marked=0,0:20:12.40,0:20:13.60,Default,,0000,0000,0000,,{\fad(020,100)}准备射出
Dialogue: Marked=0,0:20:13.80,0:20:15.40,Default,,0000,0000,0000,,{\fad(020,100)}第  {\fs30}{\fnBitsumishi}{\fnBitsumishi}1{\fs35}{\fn方正粗宋简体}  锁定栓释放
Dialogue: Marked=0,0:20:17.00,0:20:18.00,Default,,0000,0000,0000,,{\fad(010,100)}确认解除
Dialogue: Marked=0,0:20:18.20,0:20:20.20,Default,,0000,0000,0000,,{\fad(010,100)}脐带式管线桥开始移动

Dialogue: Marked=0,0:20:22.60,0:20:24.30,Default,,0000,0000,0000,,{\fad(030,100)}第 {\fs30}{\fnBitsumishi}2{\fs35}{\fn方正粗宋简体} 锁定栓释放
Dialogue: Marked=0,0:20:26.20,0:20:28.01,Default,,0000,0000,0000,,{\fad(030,100)}第  {\fs30}{\fnBitsumishi}1{\fs35}{\fn方正粗宋简体}  拘束器移除
Dialogue: Marked=0,0:20:28.20,0:20:30.80,Default,,0000,0000,0000,,{\fad(030,100)}以及，第 {\fs30}{\fnBitsumishi}2{\fs35}{\fn方正粗宋简体} 拘束器移除
Dialogue: Marked=0,0:20:34.00,0:20:37.10,Default,,0000,0000,0000,,{\fad(030,100)}解除从 {\fs30}{\fnBitsumishi}1{\fs35}{\fn方正粗宋简体} 号到 {\fs28}{\fnBitsumishi}15{\fs35}{\fn方正粗宋简体} 号的安全装置
Dialogue: Marked=0,0:20:37.10,0:20:38.20,Default,,0000,0000,0000,,{\fad(050,100)}确认解除
Dialogue: Marked=0,0:20:38.60,0:20:40.60,Default,,0000,0000,0000,,{\fad(050,100)}现在初号机的状态是“ {\fs30}{\fnBitsumishi}Free{\fs35}{\fn方正粗宋简体} ”
Dialogue: Marked=0,0:20:40.70,0:20:42.30,Default,,0000,0000,0000,,{\fad(050,100)}内部电源充电完毕
Dialogue: Marked=0,0:20:42.30,0:20:44.35,Default,,0000,0000,0000,,{\fad(050,100)}外部电源插座一切正常
Dialogue: Marked=0,0:20:44.90,0:20:45.60,Default,,0000,0000,0000,,{\fad(020,100)}明白
Dialogue: Marked=0,0:20:45.85,0:20:47.80,Default,,0000,0000,0000,,{\fad(050,150)}{\fs30}{\fnBitsumishi}EVA{\fs35}{\fn方正粗宋简体} 初号机移至射出口
Dialogue: Marked=0,0:21:03.20,0:21:04.20,Default,,0000,0000,0000,,{\fad(050,080)}路线畅通
Dialogue: Marked=0,0:21:04.20,0:21:05.30,Default,,0000,0000,0000,,{\fad(080,080)}{\fs28}{\fnBitsumishi}ALL GREEN

Dialogue: Marked=0,0:21:05.73,0:21:07.00,Default,,0000,0000,0000,,{\fad(030,050)}射出准备完成
Dialogue: Marked=0,0:21:08.10,0:21:08.80,Default,,0000,0000,0000,,{\fad(050,100)}明白
Dialogue: Marked=0,0:21:09.95,0:21:11.00,Default,,0000,0000,0000,,{\fad(030,050)}没问题吧
Dialogue: Marked=0,0:21:11.00,0:21:12.00,Default,,0000,0000,0000,,{\fad(020,100)}当然
Dialogue: Marked=0,0:21:12.80,0:21:15.60,Default,,0000,0000,0000,,{\fad(050,050)}不打倒使徒我们就没有未来
Dialogue: Marked=0,0:21:17.00,0:21:20.00,Default,,0000,0000,0000,,{\fad(050,050)}碇，这样真的可以吗
Dialogue: Marked=0,0:21:21.70,0:21:22.50,Default,,0000,0000,0000,,{\fad(050,050)}{\fs36}发射！
Dialogue: Marked=0,0:21:56.74,0:21:58.80,Default,,0000,0000,0000,,{\fad(050,100)}真嗣，别死啊


Dialogue: Marked=0,0:23:06.50,0:23:07.90,Default,,0000,0000,0000,,{\fad(050,100)}{\fs30}{\fnBitsumishi}EVA{\fs35}{\fn方正粗宋简体} 击败使徒
Dialogue: Marked=0,0:23:07.95,0:23:10.00,Default,,0000,0000,0000,,{\fad(050,100)}但这只是一切的开始
Dialogue: Marked=0,0:23:10.30,0:23:12.20,Default,,0000,0000,0000,,{\fad(050,100)}逃避父亲的真嗣
Dialogue: Marked=0,0:23:12.25,0:23:15.30,Default,,0000,0000,0000,,{\fad(020,100)}美里的傲慢让她决心自己拯救真嗣
Dialogue: Marked=0,0:23:15.65,0:23:17.45,Default,,0000,0000,0000,,{\fad(050,100)}下集\N陌生的天花板
Dialogue: Marked=0,0:23:18.25,0:23:20.10,BGS,,0000,0000,0010,,{\fad(050,100)}{\fs30}下集也将服务满点哦

苍冰凝火

;Dialogue: Marked=0,0:03:30.40,0:03:33.20,Default,,0400,0000,0008,,{\fs 28}第一话 使徒来袭
能不能变一个字体，个人感觉“第一话 使徒来袭”这个作为开始变个字体显得特殊些？

另外建议以后诸如“暴走”之类突然插入的文字画面变字体或颜色，也是一个特殊性（红色？）

Shirley

最初由 苍冰凝火 发表
[B];Dialogue: Marked=0,0:03:30.40,0:03:33.20,Default,,0400,0000,0008,,{\fs 28}第一话 使徒来袭
能不能变一个字体，个人感觉“第一话 使徒来袭”这个作为开始变个字体显得特殊些？

另外建议以后诸如“暴走”之类突然插入的文字画面变字体或颜色，也是一个特殊性（红色？） [/B]

1 标题决定不放字幕，每话结尾自有下一话的提示
2 不搞花俏的东西

sekurth

可以把逗号去掉吗，我觉得对白中的逗号很碍眼，另外全角半角有时候也会出现乱用，不如全部换成空格吧。

AleCli

越来越接近于完美了

备忘：第三/3新东京市 还有待研究。动画中 3  和 三 都出现过……  第六话标题是 决战 第3新东京市 ，第一话中的路标是 第三……，而第四话中又出现过 第2新东京市 的路标

ANGELS_ZC

Dialogue: Marked=0,0:12:47.95,0:12:49.40,Default,,0000,0000,0000,,{\fad(050,050)}那东西真的能动吗
Dialogue: Marked=0,0:12:49.75,0:12:51.75,Default,,0000,0000,0000,,{\fad(050,050)}不是一次都没有动过吗
Dialogue: Marked=0,0:12:51.80,0:12:57.11,Default,,0000,0000,0000,,{\fad(050,050)}启动机率是 {\fs30}{\fnBitsumishi}0.0000000{\fsp 4}01%[/COLOR]
Dialogue: Marked=0,0:12:57.45,0:12:59.80,Default,,0000,0000,0000,,{\fad(050,050)}叫它 {\fs30}{\fnBitsumishi}09{\fs34}{\fn方正粗宋简体} 系统真是讽刺

不是说09％的吗？怎么又成01％了？

Shirley

最初由 sekurth 发表
[B]可以把逗号去掉吗，我觉得对白中的逗号很碍眼，另外全角半角有时候也会出现乱用，不如全部换成空格吧。 [/B]

那是潜移默化的问题，你其他字幕组的作品看多了

用逗号是应该的

Shirley

最初由 ANGELS_ZC 发表
[B]不是说09％的吗？怎么又成01％了？ [/B]

讲的是1，还是按照声优为准，台本错误

sakiel

最初由 AleCli 发表
[B]越来越接近于完美了

备忘：第三/3新东京市 还有待研究。动画中 3  和 三 都出现过……  第六话标题是 决战 第3新东京市 ，第一话中的路标是 第三……，而第四话中又出现过 第2新东京市 的路标 [/B]

其实光第二集就出现了两次“第3新东京市”……
不过我倒觉得，不管日本那边怎么样，在这里还是根据中文的习惯比较好。

还有使徒也是，看第14集，全都是写“第3の使徒”、“第4の使徒”的……

PS:我在日文Google上不论打“第3新東京市”还是“第三新東京市”都可以搜出一大堆网址……

nanbniel

美里的傲慢让她决心自己拯救真嗣
————————————————
这里把傲慢改成自负感觉好一点
————————————————
Marked=0,0:23:18.25,0:23:20.10,BGS,,0000,0000,0010,,{\fad(050,100)}{\fs30}下集也将服务满点哦
————————————————
服务满点？？？
不理解...